About
Precision metalwork
for architecture.
Metal Craft Studio provides precision sheet-metal processing and architectural metal fabrication from its manufacturing facility in Narela, Delhi — combining laser cutting, V-grooving, CNC bending, fabrication, finishing and custom development in one place.
Who we are
What MCS actually does
MCS is not a general fabrication shop that also does architectural work. The machines, the sequence and the finishing discipline are all set up around one thing: metal that will be looked at closely.
That focus shows up in decisions that would not make sense elsewhere — grooving a bend line to remove a radius nobody would notice on a machine guard, or coating a finished assembly rather than buying pre-coated sheet and accepting silver edges at every joint.
Work is supplied to architects, interior designers, builders, contractors, fabricators, furniture manufacturers, PMCs and project teams, from Delhi NCR across India.
What we do
Who we serve
Why MCS
What is different here
Stated as things MCS does, not as superlatives.
Precision V-grooving
A milled channel on the bend line, so the external corner is engineered rather than accidental.
Coated after fabrication
Never pre-coated sheet. Colour continues across faces, edges and welds.
In-house chain
Cut, groove, bend, weld, buff and finish in one facility, so nothing critical happens out of sight.
Multi-metal
Stainless steel, mild steel, aluminium, brass, bronze, copper and zinc from 0.25 to 4 mm.
Prototype to production
Mock-ups and bulk runs off the same machines, so the sample is reproducible.
Architect-focused support
Drawing review that tells you what will not work, before you commit to it.
Quality control
Ten checks, in sequence
Drawing review
The detail is read against what the machines can hold before anything is cut.
Material check
Grade, thickness and surface condition of incoming sheet.
Laser cutting check
Dimensions, edge quality and pattern registration off the bed.
V-groove check
Groove position, depth and remaining web on the bend line.
Bending check
Angles and leg lengths against the section drawing.
Fabrication check
Weld quality, squareness and assembly fit.
Surface / finish check
Grain direction, consistency and freedom from handling marks.
Final dimension check
Overall sizes and hole positions against the approved drawing.
Protective packing
Film, interleaving and crating appropriate to the finish.
Dispatch
Numbered and sequenced to suit the installation order.
The work, installed
Seen standing up
A profile on a bench tells you the section. It does not tell you what a ceiling, a screen or a wall of it looks like once it is lit and in place. These are our own pieces, built and installed for display.
Start a project
Want to see the work?
Send a drawing, or ask for a sample set.