Request a quote
Design and add to your BOQ
Plan and see it

Start with an example

Every tool opens with a ready example: change a size and watch the drawing, the 3D view and the BOQ follow. No sign-up to try; register once to save and download.

All design tools
Core job work
Finishing, plant & process
CNC V-grooving channel milled into stainless steel sheet before bending

The difference is in the edge

Laser → V-groove → bend → weld → finish → inspect. One chain, one workshop, your drawing.

V-grooving vs normal bending
Profiles & Trims
Surfaces
Systems
Elements

Glass Housing Profiles

Every product here was made to a drawing. Where V-grooving matters most: a housing is only as clean as its corner.

View productAll 86 job-work examples
Get started
Libraries
About MCS

Design tool · Louver Planner

Plan your louver,
blade by blade

Enter the opening, choose the blade section, its angle and the pitch. You see the elevation and the section to scale, how many blades and supports it takes, and whether the blades overlap seen straight on. A geometric plan only: it does not rate airflow, rain or sun.

1 Start with an example then change any size

Elevation, 2,400 × 1,500 mm: 18 blades, 3 supports (dashed). The band of each blade is what it covers seen straight on.
Section through the first 6 blades, outside on the right: pitch 83.5 mm, blades reach 98 mm deep.
Z blade 20 × 100 × 20, at 45°, 1.5 mm aluminium, mill (as supplied).
Blades per opening
18
Blade length
2,390 mm
Pitch evened out
83.5 mm
Supports per opening
3
All openings
18 blades · 43 m
  • ✓Seen straight on, the blades overlap: no straight view through (a geometric check only, not a rain or light test).
  • ✓Sizes look buildable. Our design team checks the section, the spans and the fixings on your drawing.
2 Opening
Blades run
3 Blade
More settings: edges, supports, finish
Surface finish
Coating
PVD colours go on stainless steel 304 and 316 only. Powder coating for aluminium is arranged by MCS through approved coating vendors.
4 Add to BOQ
Open my BOQ →
The blades go in as profiles (18 × 2,390 mm), the support channels as a second line (3 × 1,500 mm). Each can be changed later in the profile builder. Prices come from MCS on request.

Start a project

Louvers for
a whole façade?

Send the elevations. We plan the blades, the supports and the joints with you and make a sample blade.

Upload a drawingRequest a quoteWhatsApp MCS