Special tool · Profile builder
Build your profile,
fold by fold
Draw a profile leg by leg, or a panel folded on all four sides with mitred corners and optional perforation. See it in 3D and in 2D, add every item of your job to the BOQ, and download the BOQ with a drawing sheet for each item, ready for our team to quote.
Registered with us before? to see your earlier BOQs.
1 Start from a shape
2 Sizes and bends
- 1
- 2
- 3free end
3 Sheet and material
✓Fits the 4 × 10 ft · 1219 × 3048 mm sheet.
4 Finish and coating
5 Add it to your BOQ
Add every profile and panel of your job, then press Next: the BOQ (step 2) lists them all and makes the PDF.Sizes are outside dimensions, drawn with sharp V-grooved corners. Our design team works out the flat size, groove depth and bend order on your drawing.
1 Panel size
2 The two bends on each side
- All four
3 Sheet and metal
✓The panel fits the 4 × 8 ft · 1219 × 2438 mm sheet.
4 Perforation optional
5 Finish and coating of the face
6 Add it to your BOQ
Sizes are outside sizes. Our design team works out the flat size, the groove depth, the corner detail and the bend order on your drawing.
1 Panel size
The flutes run along the height. Sheets are 4 × 8 ft · 1219 × 2438 mm (8 ft long), so a panel is at most 2438 mm high.2 Flutes
The flutes are spread evenly across the width; what is left over is split between the two plain edges. Every bend is V-grooved for a sharp corner. A return of 0 leaves the edges straight.3 Metal
✓One 4 × 8 ft · 1219 × 2438 mm sheet gives 1 panel of this size. The widest panel with these flutes from one sheet: about 1,060 mm.
4 Finish and coating of the face
5 Add it to your BOQ
Sizes are outside sizes. Our design team works out the flat size, the groove depth and the bend order on your drawing.
Your BOQ 0
Every profile and panel you add, with quantities, sizes and prices. One click gives you an Excel sheet and a PDF with a drawing sheet for each item.
Nothing in the BOQ yet. Go back to step 1, design a profile or a panel and press “Add to the BOQ”. Until then the files show the design on screen.
Password: the Excel sheet and the PDF open with your own 6-character password. Register once after downloading and we e-mail it to you at once. Registered before? so the files open with your usual password. Lost it? WhatsApp us on +91 98117 70005.
Sizes and prices are estimates until our design team confirms them on your drawing.
Start a project
Ready to make
your profile?
Send the drawing from the builder, or your own. Our design team checks the flat size, the groove depth and the bend order, and makes a sample on the production machines.