Request a quote
Plan your sheet metal with us
Plan, check and convert
Ready designs

Start with an example

Every tool opens with a ready example: change a size and watch the drawing, the 3D view and the BOQ follow. No sign-up to try; register once to save and download.

All design tools
How we make
Factory & development
Experience & the company

The sheet metal studio for B2B projects

Laser → V-groove → bend → weld → finish → inspect. One chain, one workshop in Delhi, your drawing. The whole Studio on one page.

The Studio
Profiles & Trims
Surfaces
Systems
ElementsFinishes & swatches
Profile types & drawings New

Sharp corners, our USP

Every range here is folded from flat sheet to a drawing. Where a corner is seen, we V-groove it first, so the edge closes sharp instead of round.

V-grooving vs normal bendingAll 85 job-work examplesComplete Catalogue (PDF)

Material · MS

Mild Steel

The metal for structure and for parts that are not on show. It is strong, economical and easy to weld. It must be coated, because unprotected mild steel corrodes.

Request a quoteAll materials
Mild steel sheet surface, close view
Mild SteelMild steel sheet surface, close view

Detail

Specifying mild steel

PropertiesHigh strength, easy to weld and form, much cheaper than stainless steel, and magnetic.
Where to specifySub-frames, carriers, brackets, frames, and anything that will be powder coated or concealed.
FinishesPowder coating in any RAL colour, or primed. Mild steel is not specified bare where it is exposed.
Fabrication notesIt forms and welds predictably. That makes it the sensible choice for structural sub-assemblies behind an architectural finish.
Cost noteWhere a section is concealed, mild steel behind a stainless steel face is usually the right answer for both engineering and cost.
Mild Steel swatch plate with the MCS mark laser cut through its bottom right corner
The mild steel swatch plate, from a photograph of the real sheet. Ask for the physical swatch before you specify.

Finishes

Available on mild steel

Matte swatch plate with the MCS mark laser cut through its bottom right cornerMatteAll metalsPowder Coating swatch plate with the MCS mark laser cut through its bottom right cornerPowder CoatingMS · Aluminium · GI
Open the finish libraryMetal swatchesProducts in this metal

In this metal

22 products made in mild steel

Stack of folded mild steel box trays
CustomV-grooved
Custom FabricationMild Steel FabricationMSMCS-CUS-003
Gold-finish stainless steel L profile with a sharp bent corner
AvailableV-grooved
Architectural Profiles & TrimsL ProfileSS 304 · Aluminium · BrassMCS-PRF-001
Stainless steel T profile with a sharp bent web, angled view
AvailableV-grooved
Architectural Profiles & TrimsT ProfileSS 304 · Aluminium · BrassMCS-PRF-002
Champagne-gold brushed U channel on a dark fabric
AvailableV-grooved
Architectural Profiles & TrimsU & C ProfileSS 304 · Aluminium · BrassMCS-PRF-003
Mirror-finish stainless steel P channel, seen end-on, with its protective film peeled back
AvailableV-grooved
Architectural Profiles & TrimsP ChannelSS 304 · Aluminium · BrassMCS-PRF-005
Galvanised steel Z profile, side view
AvailableV-grooved
Architectural Profiles & TrimsZ ProfileSS 304 · Aluminium · MSMCS-PRF-006
Flat patti strip in a brushed gold finish
Available
Architectural Profiles & TrimsFlat PattiSS 304 · Brass · CopperMCS-PRF-007
Stainless steel I-section profile seen straight from the end, showing both box flanges
CustomV-grooved
Architectural Profiles & TrimsI ProfileSS 304 · Aluminium · BrassMCS-PRF-009
See all 22 in the product index

Start a project

Specifying mild steel?

Send the detail and MCS will confirm thickness, finish and whether it forms as drawn.

Upload a drawingRequest a quoteWhatsApp MCS